Paint Protection Film Perth

Keep Your Paint Out of the Firing Line

Every drive exposes your vehicle to loose stones, road debris, insects and other hazards that can mark its paintwork. Paint protection film creates a physical barrier over the panels most likely to take the impact.

At Sharkey Auto Detailing, we professionally install Avery Dennison paint protection film in Perth from our purpose-built workshop. Choose targeted protection for high-impact areas, complete front-end coverage or PPF across the entire vehicle.

What Is Paint Protection Film?

Paint protection film—commonly called PPF—is a transparent polyurethane film installed over automotive paintwork.
Unlike a liquid coating, PPF adds a physical protective layer between the paint and the road. It helps defend covered panels against:

The film is designed to preserve the appearance of the paint beneath it without hiding the vehicle’s original colour.
PPF cannot make a vehicle damage-proof, but it can significantly reduce the everyday damage that unprotected paintwork receives.

Let's make you shining

Looking for Car Detailing in Perth?

Book at your earliest to get your ride shining.

AVERY DENNISON PAINT

PROTECTION FILM

Protection Designed to Be Seen Through, Not Looked At

We use Avery Dennison PPF, a high-performance automotive paint protection film developed for protecting complete vehicles and vulnerable body panels.

Its enhanced polyurethane construction combines paint protection with high optical clarity. The film is designed to sit discreetly over the paint while helping protect it from scratches, stone chips and road contamination.

Self-Healing Top Layer

Minor scratches and light swirl marks within the film can self-heal when exposed to heat, helping the surface maintain a cleaner appearance.

THERMAL ELASTOMER REFLOW

High Optical Clarity

The transparent film allows the colour and finish of the original paintwork to remain visible rather than creating an obvious covered appearance.

NON-YELLOWING PURE CLEAR

Scratch and Stain Resistance

The film helps protect the covered surface against minor abrasions, insects, environmental contamination and staining.

CHEMICAL & ETCH RESILIENT

Gloss and Matte Options

Avery Dennison offers gloss and matte paint protection film options. Product suitability and availability can be confirmed during your consultation.

BESPOKE FINISH SELECTION

CHOOSE YOUR PPF COVERAGE

Protect the Areas That Match the Way You Drive

You do not necessarily need to cover every panel. We can recommend a PPF package based on your vehicle, driving habits, budget and the areas you want protected.

COVERAGE	Essential Front	Full Front	Full Vehicle
Front bumper	⊙ Covered	⊙ Covered	⊙ Covered
Bonnet	Partial	Full	Full
Front guards	Partial	Full	Full
Mirror caps	⊙ Covered	⊙ Covered	⊙ Covered
Door-handle cups	⊙ Covered	⊙ Covered	⊙ Covered
Remaining painted panels	—	—	⊙ Covered
BEST FOR:	Targeted protection	High-impact coverage	Maximum coverage

ⓘ

Final coverage is confirmed after assessing the vehicle because panel shapes and installation requirements vary between makes and models.

THE ATELIER STANDARD

PPF INSTALLATION AT SHARKEY

Preparation and Installation Under One Roof

Your vehicle is prepared and protected inside our purpose-built workshop.

Vehicle and
Paint
Assessment

We inspect the vehicle, discuss the panels you want protected and check the paint for defects that may remain visible beneath the film.

PHASE 1 / ANALYSIS

Thorough
Surface
Preparation

The vehicle is washed and decontaminated so the film is not installed over dirt, residue or bonded contamination.

PHASE 2 / PURIFY

Paint
Refinement
Where Required

If the paint has visible swirls, scratches or preparation marks, we will recommend the appropriate paint correction before PPF installation.

PHASE 3 / CALIBRATE

Precision Film
Installation

Avery Dennison PPF is positioned over the agreed panels, with careful attention given to alignment, panel contours and the finished appearance.

PHASE 4 / BOND

Final Inspection

The protected areas are checked under workshop lighting before collection. We then explain initial care, washing and ongoing maintenance.

PHASE 5 / HANDOVER

LABORATORY-CALIBRATED ENVIRONMENT

INSIDE OUR PPF WORKSHOP

Conditions That Let Us Concentrate on the Finish

PPF installation needs more than a covered parking space. Dust, surface contamination, inadequate lighting and changing temperatures can affect both the installation process and the final presentation.

Our purpose-built workshop provides a clean indoor workspace with controlled lighting and two air-conditioning systems operating during installation when required. This gives our team clear visibility across the paint and a more consistent environment for surface preparation, film positioning and final inspection.

Twin A/C Environmental Control

Dual dedicated climate units eliminate temperature swings that impact polyurethane tack and stretch dynamics.

Cleanroom Dust Mitigation

Airborne particulate control minimizes debris entrapment between the adhesive and bare clearcoat.

High-CRI Inspection Arrays

Multi-angle 5000K illumination reveals microscopic contours, edge wraps, and surface variations.

COMPARATIVE ARCHITECTURE

PPF OR CERAMIC COATING?

Both protect vehicle paint, but they perform different jobs.

PPF Role

PPF is a physical film designed to help protect covered panels from stone chips, road debris and minor abrasions.

Ceramic Coating Role

Ceramic coating is a liquid-applied protective layer that improves gloss, water behaviour and resistance to environmental contamination. It does not provide the same physical impact barrier as PPF.

For drivers wanting both forms of protection, PPF can be installed over vulnerable panels while a compatible ceramic coating protects the appropriate exterior surfaces. The recommended application depends on the chosen products and coverage.

EXPLORE CERAMIC COATING ASK ABOUT COMBINED PROTECTION

WHY CHOOSE SHARKEY FOR PPF
IN PERTH?

Protection Planned Around Your Vehicle

Avery Dennison Film

We install automotive PPF from a recognised global film manufacturer rather than using an unidentified generic product.

Coverage That Makes Sense

Choose targeted, full-front or full-vehicle protection according to how and where the vehicle is driven.

Preparation Before
Installation

The paint is inspected and properly cleaned before film is applied. If correction is required, we explain it before proceeding.

Purpose-Built Workshop

Installation is completed indoors under controlled lighting, cleanliness and application conditions at our workshop.

Clear, Vehicle-Specific
Quotes

Your quote identifies the proposed coverage, paint preparation, installation requirements, workshop time and applicable warranty conditions.

Practical Aftercare Guidance

At handover, we explain how to wash and maintain the film and what to avoid during its initial setting period.

Request Your PPF Quote

FAQ

How much does PPF cost in Perth?

PPF pricing depends on the vehicle, the panels being covered, installation complexity and paint preparation. Targeted front-end protection costs less than full-front or full-vehicle coverage. Contact us with your vehicle details for an accurate quote.

Will PPF stop every stone chip and scratch?

No film can guarantee protection from every impact. PPF is designed to help reduce damage from stone chips, road debris, minor scratches and abrasions on the covered panels

Is PPF the same as a vinyl wrap?

No. Colour-change vinyl is mainly used to alter a vehicle’s appearance. Paint protection film is engineered primarily to protect the paint underneath. Transparent gloss and matte PPF options can preserve or modify the appearance depending on the selected film.

Can PPF self-heal?

Avery Dennison PPF products feature self-healing technology designed to help minor scratches in the film disappear when exposed to heat. This does not repair deep damage or scratches that penetrate through the film.

Can PPF be installed on a new car?

Yes. New vehicles are strong candidates for PPF because the original paint can be protected before stone chips and regular driving marks accumulate. The paint should still be inspected and prepared before installation.

Does the paint need correction first?

Not every vehicle requires the same correction. However, scratches, swirl marks or other defects may remain visible beneath transparent film. We inspect the paint and recommend only the preparation required for its condition.

Can ceramic coating be applied with PPF?

Yes, PPF and compatible ceramic coatings can form part of the same protection plan. The correct installation order and suitable surfaces depend on the chosen film and coating products.

How should PPF be maintained?

Use safe hand-washing methods and avoid aggressive chemicals, stiff automatic car-wash brushes and abrasive polishing. After installation, we provide care instructions relevant to the film and vehicle.